Add a Flow with "Write-Action" Instruction via REST-API of HPE-SDN-Controller...
Hello,I added some Flows via the REST API. There i can use the "apply_action" or the "meter"-Field in the Instruction. For example:{"flow":{"priority":50100,"table_id":100,"match":[{"eth_type":...
View ArticleHow to understand and culculate with a Meter on a 2920HP-Switch
Hello,I try to use a Meter on one of my 2920HP-Switches. I have already one Flow "attached" to the following meter:{"version": "1.3.0","meter": {"id": 1,"flags": ["kbps"],"bands": [{"burst_size":...
View ArticlePing fails
I am using Mininet to start a topology with an Hp SDN controller (version:2.7.18.0503) .sudo mn --custom topo1.py --topo=mytopo --controller=remote,ip=<CONTROLLER_IP>The messages shown after...
View ArticleProLiant DL180 G5 Unkonown & SATA RAID Controller Device
Hello,I have a ProLiant DL180 G5 Server, before using Windows Server 2003 but cannot be directly upgraded to 2008r2, so I delete the system re-install 2008r2, the installation of the system after two...
View ArticlePort mirroring using OpenFlow 1.3 and HPE VAN SDN Controller
Hello,I am trying to configure an HP switch (HP-2920-48G-POEP) via OpenFlow 1.3 using the HPE VAN SDN Controller.What I'd like to do is add a flow that mirrors all traffic through a single port and...
View ArticleWhich dpctl is used by the HP's Openflow Administrator Guide
I'm using HP 2920 now, and following HP's Guide : https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=1827663&docLocale=en_US&docId=emr_na-c04943224In this guide, dpctl is been used but...
View ArticleUFT can not find scripts
Run Error"This script was created by UFT because the script that was previously saved with the test could not be found."
View ArticleAbout default route in SDN
Hi guys,I'm using HP 2920 as my SDN switch.In my topo, controller and host are in different VLANs. But host cannot ping the gateway of his VLAN, what should I do to fix it?And by the way, what if I...
View ArticleMeter table's byte_in_count is not working
HI guys,I'm using meter table to do some QoS limit and measure, but I don't know why everything going well expect the byte_in_count is always a big constant number and didn't change (be shown as 0 in...
View ArticleNNM_ 10.40: The installer cannot find the HPE public key on your system. The...
Hi guys I am install NNM i 10.4x on RH 7, before is NNM 10.3x on server, but uninstall, an now that i require install 10.4x, it shows me the following error:The installer cannot find the HPE public key...
View Articleextra link problem
HiI simulated a network with the following topology in mininet.from mininet.topo import Topo from mininet.net import Mininet from mininet.node import Node , Controller, RemoteController, OVSSwitch from...
View ArticleHPE C7000 Active Standby Onboard Administrator configuration
I am working on HP c7000 blade enclosure system. It has dual OAs (OA1 - Active and OA2- Standby) and I have configured both OAs with same subnet IP address. I have connected both OAs to network...
View ArticleLooking for a good quality management software
The cloud transition is always hard. It is revamping everything your company. It's changing how the company works. My company is in such a transition period right now. Each and every one of us is...
View ArticleNew to SDN - Mininet with HP VAN SDN 2.7 - Pings failing for OpenFlow13
Hi,I'm currently experimenting with SDN. In particular, I'm running the latest HP VAN SDN controller (192.168.0.102) with Mininet. Pings for mininet hosts seem to work only when I specify the...
View ArticleHP Corporate Technology
Looking for a good corporate communication technology system to connect with clients. Can anyone suggest us technology for via ENS it's Managed WordPress Service provider speacialised in Blogging...
View ArticleWorld Readable and Writeable Directory on Anonymous FTP
Hi,Changing permissions for ftp/pub will resolve the vulnerability CVE-1999-0527 or not.If not to resolve the vulnerabilty CVE-1999-0527 what actions need to be taken.I am using HPUX B.11.31...
View ArticleDeployment software in network's systems and setup centralized security
Respected All,1 Microsoft server 2016 R2 Enterprise Edition 64 bit, and setup domain and assined as core server with all required like Graphic card, RAM, NAS, RAID Configuration. Additional server...
View ArticleFAST FAILOVER GROUP on HP3800 using ONOS
I'm trying to control a switch HP3800 (firmware KA.16.01.0006) using ONOS controller. I succeded to install flow entries and also group entries of type ALL. However, I'm experiencing problems...
View ArticleSurvey on Software Defined Networking
HI,To all respected members here kindly take out 5 mins to complete a survey by clicking the link below this survey is a part my MSc work, I need your opinion about SDN. I am very grateful to you guys...
View ArticleNew to SDN - Mininet with HP VAN SDN 2.7 - Pings failing for OpenFlow13
Hi,I'm currently experimenting with SDN. In particular, I'm running the latest HP VAN SDN controller (192.168.0.102) with Mininet. Pings for mininet hosts seem to work only when I specify the...
View Article